Process Hierarchy

If you are interested in this process, either by itself or as part of a longer processing sequence, please send us email at engineering@mems-exchange.org or call us at (703) 262-5368
  Gold etch
Process characteristics:
Depth
Depth of material removed by etch process
Depth*
Depth of material removed by etch process, must be 0 .. 5 µm
0 .. 5 µm
Batch size 1
Etch rate 0.168 µm/min
Etchant
Solutions and their concentrations.
 Transene Gold TFA
Mask materials
Materials that can be used to mask etching.
 photoresist (category)
Material gold
Selectivity
Primary material removal rate divided by removal rates of secondary materials (i.e., factors by which primary material is removed faster than secondary materials)
 gold: 1
Sides processed both
Temperature 25 °C
Wafer size
Wafer size
Equipment Acid/etch wet bench
Equipment characteristics:
Wafer holder
Device that holds the wafers during processing.
 teflon chuck
Wafer materials
List of wafer materials this tool can accept (not list of all materials, just the wafer itself).
 silicon
Wafer thickness
List or range of wafer thicknesses the tool can accept
 200 .. 1200 µm